Dumpster Diving – Walkway Waste To Mirrored Bar – Trash To Treasure- ASMR Metal Melting – BigStackD

Hey there you beautiful people, today I do some dumpster diving and find some awesome pure aluminium walkway offcuts, I don’t even skim any slag out in this video as it’s clean and pure. Another 6 kg to add to The BigStackD. Sit back relax enjoy and unwind. In the bin there was also a couple of compressors but I couldn’t lift them out as they were completely full of oil and would easily have been over 100 kg each , there was also a motor in their attached to a gearbox again that was well over 100 kg and I couldn’t get that out either so unfortunately had to leave them😞.  
Feel like  supporting the channel Simply donate some of your time just by allowing the ads to play through this will help out a lot and that’s how I make a bit extra revenue and the good thing is more revenue means more giveaways👊🏻😄. A better way to support the channel is play one of my  playlists on your computer before you walk away from it and let it play through that really helps as well but don’t ever feel as though you need to watch the ads if you don’t want to simply skip them and move into the video it’s completely up to you and I understand if you don’t have the time to do so👌🏻and like I always say if you like the rings shown and used in this video be sure to check out the description where you can get 20% off the already discounted rings using my code and if you want to try your hand at melting yourself you can buy the burner on its own or the whole furnace set up and I can organize a 5% link for you off the total furnace price just email me on [email protected] 😁👍🏻.
Follow me on Instagram for more behind the scenes pics. 

Want 20% off then Use the code      Dion 
This ring company makes bracelets and other things and I will only ever back a company I believe in and these rings are of the highest quality they are absolutely awesome!
I also have a post office address below in case anyone wants to send a letter or something and I really love letters. Just be sure to add your online youtube name or email address .

D Heighway 
PO Box 7192
Eaton, WA 6232  


These videos are for entertainment only and nothing you see in these videos should be tried without proper experience. These videos are not intended for children.
My other 280+ videos
Tongs forged by my Friend Sam on his channel below
Sam Towns, Bladesmith TONG MAKING

Follow me on Facebook

My Personal Stamp was Made at etsy.com
Forge supplied by my friends in Devil-Forge. They sell a large selection of forges, ovens, burners and even the most incredible 5-burner ironworking furnace on the Internet.

EBay Store

I start with an 80 grit flap disc on my angle grinder then I use my drill with 50 mm round sanding discs . I start with 150 grit then go through the following Grits 240-400-800 Then once I get to the following Grits I use a small squirt of WD-40 1200-1500-2000-2500-3000. The WD40 helps to lubricate the discs and stops the sanding disk binding up with the metal powder . Then after that I use my buffer wheel on my bench grinder to get a perfect mirrored finish on it??????.



Leave a Reply

Your email address will not be published. Required fields are marked *